|
Product Details:
|
| Structure: | Needle | Withstand Voltage: | 2000V/1min |
|---|---|---|---|
| Resistance: | 144Ω±10% | Relative Humidity: | 20%-85% |
| Temperature Range: | -5℃-45℃ | Work Model: | 150gf |
| High Light: | 0.36A DC Power Solenoid,12v 5Mm Open Frame Solenoid,0.36A 12v dc solenoid |
||
5Mm Stroke Dc 12v 24v Open Frame Pull Push Solenoid Customized long life
Product Description
| No | Project | technical parameter | |
| 1 | Mode of action of exercise | Push pull type | |
| 2 | Power on rate | 25% | |
| 3 | Rated parameters | Voltage | 12 VDC |
| 4 | electric current | 0.36A | |
| 5 | resistance | 3Ω | |
| 6 | power | 4.6W | |
| 7 | Applicable range of voltage change | 18V~26V(低值为启动电压) | |
| 8 | Initial force | 150G | |
| 9 | Design itinerary | 15mm | |
| 10 | Maximum single power on time | 0.1S | |
Notes for customization of solenoid products:
1. It is necessary to provide the working voltage and current characteristic power supply (DC DC / AC AC), positive and negative pulse power supply, etc;
2. Size of required solenoid products: length, width, height, stroke and suction requirements, reset requirements after power failure, etc;
3. Duty cycle of electromagnet products: long time power on, continuous power on, intermittent power on; intermittent power on for a long time each time and the interval between two times of power on
Dimensional drawing
Action diagram
Material description:
1. Armature: TISCO dt4c electrical pure iron
2. The Curie temperature curve is demagnetized without remanence
3. Copper base H62 copper, surface passivation treatment anti-oxidation
4. Brilliant material: Teflon tape, good insulation performance, in line with environmental requirements
5. The bayonet is made of imported stainless steel.
6. The armature was plated by electroless nickel plating, and the salt spray test lasted for 72 hours
7. The enameled wire adopts high-quality enameled wire imported from Germany, the temperature resistance grade is above 210 degrees, and the withstand voltage is more than 2000 v
| Quantity(Pieces) | 1 - 500 | 501 - 1000 | 1001 - 5000 | >5000 |
| Est. Time(days) | 10 | 15 | 20 | To be negotiated |
Contact Person: jason luo
Tel: +8618802564948
Fax: 86-769-2315-1292
