|
Product Details:
|
| Magnetic Source: | Permanent Magnet | Cylinder Number: | Double Cylinder |
|---|---|---|---|
| Structure: | Pull Push | Material: | Cold Rolled Sheet + Enameled Wire |
| HS Code: | 8505909090 | Insulation: | CLASS B |
| High Light: | 11W Open Frame Solenoid,DC12V Open Frame Solenoid,1240L-37 open solenoid valve |
||
Good Quality DC 12V 11W Pull Push Linear Actuator Solenoid
Brand: DSN solenoid
Product Name: embroidery electromechanical magnet
Product model: DSN1240h-1
Product voltage: DC24V current: 0.8A
Product specification: length: 26mm, diameter: φ 13mm, M10 * 1 coarse tooth (for domestic machine)
Length: 40mm, diameter: φ 12mm, M9 * 0.75 fine tooth (for Tiandao machine)
Product features: the electromagnet is powered on instantly, so the power consumption is saved. The structure of this electromagnet is simple, the use cost is low, and the installation is convenient.
Service life: more than 500000 times under rated working conditions
| P/N: | DSN-1240L-37 |
| TEST | |
| Enviroment Temperature Range: | -20ºC~45ºC |
| Relative Humidity: | 5%~60%RH |
| Rated Voltage: | DC12V |
| Wattage: | 10.8W |
| Resistance: | DC12V,R=13.3Ω±10% |
| ELECTRIC | |
| Working Voltage:: | DC12V±10% |
| Force (Potence): | pull force at 5mm≥200g |
| Insulation Resistance: | DC500V,≥50MΩ |
| Duty cycle: | ON:OFF=0.05S:0.08S, max on time is 10s, ED40% |
| Life cycle: | min.200,000 cycles |
| roduct model | Voltage | Electric current | stroke | Initial force | Single power on time |
| DSN1240-1 | DC12V | 0.8A | 3.5MM | 0.2KG | 5s DC12V Can be used for a long time |
| DSN1240 | DC24V | 0.8A | 2.8MM | 0.25KG | 5s DC12V Can be used for a long time |
Contact Person: jason luo
Tel: +8618802564948
Fax: 86-769-2315-1292
