|Insulation Resistan:||50MΩ MIN, DC500V||Biometry:||5000000|
|Customized Support:||OEM, ODM||Stroke(mm):||0-12MM|
Push Pull Open Frame Solenoid Electromagnet,
35mm Stroke Open Frame Solenoid Electromagnet,
DC12V Push Pull Solenoid Electromagnet
DC12v 35mm long stroke push-pull open frame solenoid Small electromagnet 2 buyers
Packaging & Delivery
Selling Units:Single item
Single package size:20X20X20 cm
Single gross weight:1.000 kg
Package Type:pp box packin
|Quantity(Pieces)||1 - 20000||>20000|
|Est. Time(days)||15||To be negotiated|
* Electrician pure iron shell, less residual magnetism, integrated molding, stronger magnetic permeability
* Built-in core, more conductive and low power consumption
* Power-driven core load off by the spring return(Please note, relatively soft springs, only the iron core reset) Push nut
convenient headband fixed object, such electromagnet by impact work. Inertial force huge impact.
* Suitable For: Vending machines, transport equipment, office facility household appliance, mechanical, etc.
* Three months can be returned, half a year can be exchanged
Usage range: Wide range of use, home appliances, vending machines, game consoles, car door locks.
Package include: 1pc x Small electromagnetic Electric Magnet
Please note that as an automation device actuator. Because the current, single-cycle not long power for point formula work. Single
power work time within 2 seconds of the best! Long energized coil will cause a short circuit is similar to artificial
electromagnet overheat temperature is too high will affect the life of the electromagnet.
Packing & Delivery
ODM/OEM Order Notes
1 Voltage/current required for solenoid valve ?
2 Form factor What is the required size?
3 Please provide solenoid valve needs air flow or other use flow rate .
4 Solenoid valve operation time after demand energization and power-off time after completion of the operation, (energization and power-off time of a single operation are cycles)
5 Whether there are special requirements for the use of ambient temperature or waterproofing and chemical resistance
6 Appearance of salt spray test required or not (regular 24 hours)
7 Solenoid valve seal pressure, valve opening size and controlled substances (water, air, gas, oil)
8 Are there any other requirements?
9 Sample quantity required, cycle time (regular 3 days / custom 4 weeks or more depending on the actual situation), estimated quantity of post-production, how long to place the order, typical daily capacity is 5K .
Contact Person: jason luo